F5 F50-531 Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Load Balancing Methods | - Round robin, least connections, ratio-based methods |
| SSL Offloading and Security | - SSL termination concepts - Certificate and key management |
| System Setup and Configuration | - Initial device configuration - Network and VLAN configuration |
| Profiles and Persistence | - Session persistence methods - TCP, HTTP, and SSL profiles |
| High Availability and Failover | - Failover mechanisms - Device groups and synchronization |
| iRules Fundamentals | - Traffic manipulation with iRules - Basic iRule syntax and logic |
| Troubleshooting and Monitoring | - Performance monitoring tools - Log analysis and diagnostics |
| Pools, Pool Members, and Monitors | - Load balancing pools configuration - Health monitors and status tracking |
| Traffic Management and Virtual Servers | - Traffic processing flow - Virtual server types and behavior |
| BIG-IP LTM Architecture and Fundamentals | - System components and traffic flow - LTM role in application delivery |
F5 BIG-IP v10.x LTM Essentials V10.x Sample Questions:
1. How is MAC masquerading configured?
A) Specify the desired MAC address for each VLAN for which you want this feature enabled.
B) Specify the desired MAC address for each self-IP address for which you want this feature enabled.
C) Specify the desired MAC address for each VLAN on the active system and synchronize the systems.
D) Specify the desired MAC address for each floating self-IP address for which you want this feature enabled.
2. Assuming other fail-over settings are at their default state, what would occur if the fail-over cable were to be disconnected for five seconds and then reconnected?
A) When the cable is disconnected, both systems will become active. When the voltage is restored, both systems will maintain active mode.
B) As long as network communication is not lost, no change will occur.
C) Nothing. Fail-over due to loss of voltage will not occur if the voltage is lost for less than ten seconds.
D) When the cable is disconnected, both systems will become active. When the voltage is restored, unit two will revert to standby mode.
3. Which VLANs must be enabled for a SNAT to perform as desired (translating only desired packets)?
A) The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.
B) The SNAT must be enabled for the VLANs where desired packets leave the BIG-IP.
C) The SNAT must be enabled for the VLANs where desired packets arrive and leave the BIG-IP.
D) The SNAT must be enabled for all VLANs.
4. Which two statements describe differences between the active and standby systems? (Choose two.)
A) Configuration changes can only be made on the active system.
B) Floating self-IP addresses are hosted only by the active system.
C) Virtual server addresses are hosted only by the active system.
D) Fail-over triggers only cause changes on the active system.
E) Monitors are performed only by the active system.
5. A site has six members in a pool. All of the servers have been designed, built, and configured with the same applications. It is known that each client's interactions vary significantly and can affect the performance of the servers. If traffic should be sent to all members on a regular basis, which load-balancing mode is most effective if the goal is to maintain a relatively even load across all servers?
A) Observed
B) Ratio
C) Priority
D) Round Robin
Solutions:
| Question # 1 Answer: A | Question # 2 Answer: D | Question # 3 Answer: A | Question # 4 Answer: B,C | Question # 5 Answer: A |
1042 Customer Reviews
Quality and ValueITCertKing Practice Exams are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development - no all study materials.
Tested and ApprovedWe are committed to the process of vendor and third party approvals. We believe professionals and executives alike deserve the confidence of quality coverage these authorizations provide.
Easy to PassIf you prepare for the exams using our ITCertKing testing engine, It is easy to succeed for all certifications in the first attempt. You don't have to deal with all dumps or any free torrent / rapidshare all stuff.
Try Before BuyITCertKing offers free demo of each product. You can check out the interface, question quality and usability of our practice exams before you decide to buy.
